TRX-74154-4-RED Traxxas Fiesta ST Rally BL-2s Brushless: 1/10 Scale AWD Rally Car

Ford Fiesta ST BL-2s

MODEL 74154-4: The Ford® Fiesta® ST Rally BL-2s is a 1/10 scale AWD brushless rally car that comes fully assembled and features waterproof electronics. This Ready-To-Race® model includes the TQ™ 2.4 GHz 2-channel radio system, BL-2s™ speed control, and a clipless painted body.

Note: This product requires a battery and charger (sold separately).

What’s In The Box:

• Fiesta ST Rally with BL-2s ESC and 3300 kV motor
• Quick Start Guide
• TQ 2.4 GHz radio system
• High-quality maintenance tools

What You’ll Need:

• Batteries:
  The rally car requires a single NiMH or LiPo battery.
• Charger:
  The Traxxas EZ-Peak Live charger (2971) is recommended for its easy and fast charging performance.
• AA Alkaline Batteries:
  Four AA alkaline batteries are needed for the transmitter.

Features

Clipless Body

• Officially Licensed Ford® Fiesta® ST body
• Pre-painted with applied decals
• Tough composite rear wing
• High approach angle front bumper
• Quick and easy removal
• Holds tight for intense action

Extreme Heavy Duty Upgrade Kit Installed

• Strengthened C-hubs, axle carriers, and steering blocks
• Extreme heavy-duty driveshafts
• Oversized diameter
• 6 mm axles
• Steel wheel hexes

TQ™ 2.4 GHz Transmitter

• Ergonomic transmitter with internal antenna
• Traxxas 6519 3-channel micro receiver with fail-safe security
• Patented O-ring sealed watertight receiver box keeps the micro receiver dry

BL-2s™ Waterproof Electronic Speed Control

• Heat sink accepts accessory cooling fan
• Three Programmable Drive Profiles:
  • Sport Mode: Forward / Brake / Reverse
  • Race Mode: Forward / Brake
  • Training Mode™: 50% Forward / Brake / 50% Reverse (patented)
• Traxxas EZ-Set® one-button setup
• Built-in two-stage low-voltage detection for LiPo batteries
• Compatible with:
  • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
  • LiPo battery packs: 2 cells (7.4 volts)

BL-2s Brushless Motor

• Integrated cooling fan
• Low-maintenance design
• Efficient ball bearings
• 3300 kV

Steering

• Chassis-mounted 2056 servo
• Dual bellcrank design with integrated servo saver

Easy Access Battery Compartment

• Adjustable battery hold-down
• Accepts 6- and 7-cell NiMH flat packs and 2-cell LiPo batteries

Low-CG Reinforced Modular Chassis

• High-angle front bumper
• Modular chassis makes maintenance quick and easy
• Batteries and electronics held low for improved handling
• Low-CG design dramatically increases corner speed
• Easy motor access with single-screw motor plate attachment

Suspension

• Oil-filled Ultra Shocks™
• White powder-coated springs

Drivetrain

• Full-time shaft-driven 4-wheel drive
• Oil-filled steel gear front and rear differentials
• Large 32-pitch steel spur gear

Wheels and Tires

• Pre-glued all-terrain rally tires with performance foam inserts
• 2″ outer diameter, 3″ inner diameter dual-profile 12-spoke rally wheels

Additional Details

• Rubber-Sealed Ball Bearings
• Precision Hex Hardware